Omslagfoto van de gebruiker
Gebruikersfoto

ExplodingLiPo

Laatst gezien: 13 jul, 05:10
Volgers
9
Volgend
3
Upvotes
3
Berichten
1
Hey! I've been flying FPV since 2022, I have a quite a few drones including 5", tinywhoop, and a 10" LR, I'm a helper in the Drone Community discord server, my discord is expwodingmuffin.

Activiteitenfeed

28 juni 2026 om 03:18

Heeft een bericht geplaatst

The Eachine EV800D goggles are often hard to find, it would be nice to have a second option to recommend to beginners who can't afford the Cobra X or BoxPro, would like to know your opinion on these goggles. This post is not referring to the HD version of the VR04.

28 juni 2026 om 03:13

Heeft een recensie geschreven over het product iFlight Xing-E PRO 2207 1800Kv Motor

There is better options

Very smooth motor, however they break somewhat easily, and I have had TWO arrive DOA. The T-Motor Velox motors are a great alternative.

28 juni 2026 om 03:09

Heeft een recensie geschreven over het product SkyRC iMax B6AC V2 Charger

Do not buy this

Very well documented history of being unreliable, even the genuine versions that aren't a knockoff.

27 juni 2026 om 23:50

Heeft gereageerd op het bericht van
If it is soldered well, then it will be very hard to break. If it is soldered bad, it will be easy to break.
With motor wires specifically, you want to make sure that it is soldered well, because bad soldering can add some resistance you don't want.

27 juni 2026 om 22:17

Heeft een recensie geschreven over het product TBS Source One V6 5 inch Frame Kit

Hard to mount gopro

The TBS Source one V5.1 has been one of my favorite frames of all time, I am a little disappointed to see that the newest iteration moved the front top screws further back and made it harder to get a good gopro setup. Otherwise great frame.

27 juni 2026 om 22:11

Heeft gereageerd op het bericht van
Those two are my favorite and seem to be most other people's favorite two

15 januari 2025 om 02:47

Heeft de reactie van op een vraag bij Problemen oplossen een upvote gegeven: Best battery for Mobula7 no soldering

To answer your question, just any folded cell that's 300mah or 270mah would work.


However, soldering is an unavoidable part of FPV, I think you would be much better off by just learning how to solder and installing a BT2.0 connector, the difference between using a BT2.0 and a PH2.0 connector is massive

15 januari 2025 om 02:42

Heeft gereageerd op de vraag van bij Problemen oplossen: Best battery for Mobula7 no soldering

To answer your question, just any folded cell that's 300mah or 270mah would work.


However, soldering is an unavoidable part of FPV, I think you would be much better off by just learning how to solder and installing a BT2.0 connector, the difference between using a BT2.0 and a PH2.0 connector is massive

3 januari 2025 om 00:38

Heeft gereageerd op het bericht van
Did someone say FPV spark?

1 januari 2025 om 22:40

Heeft gereageerd op het bericht van
💯

1 januari 2025 om 22:33

Heeft gereageerd op het bericht van

1 januari 2025 om 21:22

Heeft gereageerd op het bericht van
When typing a message there's a little face icon on the bottom right you can click for emojis 👍

1 januari 2025 om 21:17

Heeft gereageerd op het bericht van
I'm using multiwii, don't really see the need to upgrade.

Laten we samen de lucht in gaan en de wereld van FPV-drones naar nieuwe hoogten tillen.

© 2026 DIYFPV. Alle rechten voorbehouden.