T
4sem
Yo, at that point, i'm pretty sure you should just change a frame and new connecter son. I dont know if the motors are even gonna work man! So did your quad fly into quicksand? 😂
Responder
4sem
Autor
No 🤣 the Motors Works…
Responder
T
4sem
@Fpvsuisse well thats good then!
Responder
4sem
@Fpvsuisse The motors might freely spin, but you wont know for sure if they actually work until you replace the bt2.0 and power it up again. Be careful when you do that as something else might be damaged or broken and short/catch fire when powered on
Responder
4sem (editado 4sem)
the best thing is as tz3den says to get a new frame and transfer. If you cant do that or dont want to.. give it a really good clean with some wipes and get all the dirt off. Get some e6000 glue or glue specific for that type of plastic and just glue up the cracks. Those look pretty bad though, so it would probably break again, but the right glue on the right plastic can be pretty strong. This is a big part of the hobby, welcome to the other side haha
Betafpv air/meteor frame and canopy should work great and frankly be a lot better, depending on which Cetus that is I believe you need a 75mm frame size for replacement
edit: just saw the bt2.0 connector, that will have to be replaced and soldered to the fc before anything else can be tested or fixed
Responder
A
Deja un comentario