7sem
Building a Ducted Drone for Indoor FPV: Need Recommendations
New here and to fpv... i wanna build a ducted drone but most recomendations are for a tp3... i have a nameless rc 412t 12amp 15 amp burst, 1204 5000kv motors, and 3s batteries... would love to be able to carry a cam either naked gopro or a gopro session, or a 360 cam. I been hearing stay in the 3 to 2.5 prop range but i just want a ducted to protect drone and wherever flown especially when indoors...
Thanks ahead everyone, have a great day
Anyone that can help I appreciate it more than you know, be safe guys.
👋 1
7sem (editado 7sem)
Pavo20 Pro I/II 2s-3s, you can just get the frame if it fits the components you have. No action cam for that build unfortunately. I know this might not help to say it, the DJI o4 is what you want if you're looking to fly cinematic with this type of setup. Even just a 2" drone can be difficult to fly indoors, I absolutely wouldn't be flying a 3" inside as a beginner, especially an under powered 3". Those components wont carry an action camera with ducts either and if they did, it would probably be pretty dangerous (a Runcam Thumb might work though). My GEPRC cinelog30 v3 doesn't even get an action cam and that's got a way better ratio, I also never fly that inside as it blows everything around and creates a lot of prop wash. With those motors, you're looking at around 460g of pull total, which means your total drone weight (with battery, cam, etc) should be max 80g-115g for a good ratio and acceptable flight characteristics. Hope this helps some and by all means experiment! That's a big part of the fun of all this (but it can get expensive). Have fun, good luck!!
Responder
A
Deja un comentario