SOLVED: SkyRC D200neo LiHV Storage Charge Issue

SOLVED. - SkyRC D200neo & App - Unexpected LiHV Storage Behaviour - SOLVED.

Wow I was right - thought it was my noob inexperience causing a problem.

I contacted SkyRC support and after a few emails I managed to fully explain the issue. When programming a profile for a 450/550 LiHV battery for Storage charge using the APP the options presented to choose from are wildly incorrect.

Choice 1 shows the Cut-off voltage can be set to 0.00 V.

Choice 2 shows the lowest possible Cut-off voltage you can select is 4.25 V.

Choice 3 shows the highest possible Cut-off voltage you can select is 4.50 V.

None of these choices are suitable and really choosing the Cut-off voltage should not be an option when setting up a Storage charge profile and should be handled automatically.

It s otherwise a fantastic product, it works perfectly, it's just the mobile APP that has a bug. There is a work around though - use the LiPo Storage function instead as it works perfectly. It correctly identifies the ~3.85V target and stops automatically.

Here is the final email response from SkyRC Support.

Thank you for your email. I apologize for the lack of clarity in my previous message.

You’re correct—this is an app bug. In Storage Mode, the cut-off voltage should be limited to 3.85V–3.95V/cell. When I mentioned “Shouldn’t Allow to Set at 4.35V”, I meant that the app should not permit users to set 4.35V in Storage Mode.

We will fix this issue in the new app version.

Best regards

Your Support for SkyRC Team