A

aiden_82pp

Ostatnio widziano: 21 lis, 22:11
Obserwujący
1
Obserwowani
0
Głosy za
0
Wpisy
3
Jeszcze nie ma biografii...

Kanał aktywności

21 listopada 2026 13:05

Opublikowano post

What voltage do I charge my 480 mah lihv lava 2 batteries to. I’ve heard to only charge them to 4.20 not 4.35. Then heard that that increases there life by like 300 cycles. Is this true?

18 listopada 2026 02:04

Skomentowano post użytkownika
@hugofpv I was flying it across a maybe 100 slot parking lot and I did that 2 times. I was trying to get a top speed 

16 listopada 2026 21:35

Skomentowano post użytkownika
@hugofpv So do I need a new motor? I flew it and it happened to the same motor again and it spins easier then the other motors.

16 listopada 2026 02:29

Skomentowano post użytkownika
@AurilFPV 
Here is the photo. I plugged the battery in all of the props spin fine. Can you tell me where I need to get a motor? Thank you.
Zdjęcie opublikowane przez użytkownika

15 listopada 2026 23:10

Skomentowano post użytkownika
Thanks for responding! As you can see in the image, the AIO board is completely fine. I was spinning the motors by hand and noticed that the front right motor spun a lot easier than the rest of them. I then took it out to fly and I pushed it super hard. After pushing it super hard on the way back, the drone made the weird screeching sound again and fell to the ground. The batteries were completely fine. I’ve been monitoring them.
Zdjęcie opublikowane przez użytkownika

15 listopada 2026 20:39

Opublikowano post

HELP! I was flying my tiny whoop really fast and then I heard a like hissing sound. The drone the cut throttle and fell to the ground. Why did this happen?

14 listopada 2026 21:42

Skomentowano post użytkownika
@AurilFPV sorry I didn’t mean to attack I was just saying what I thought

14 listopada 2026 20:04

Skomentowano post użytkownika
Pls vote

14 listopada 2026 19:45

Skomentowano post użytkownika
Yeah it works great for tinywhoop!gif

14 listopada 2026 19:44

Skomentowano post użytkownika
However, the AIO board that you showed is really good so you could get that and it’d be fine. If you really want an AIO board.

14 listopada 2026 19:43

Skomentowano post użytkownika
I would get a stack for a 3 inch. They generally don’t over heat as quickly and they have higher annolog output power. 

14 listopada 2026 19:39

Opublikowano post

Is there anyone in the Rochester Minnesota area that does fpv?

Wzbijmy się razem w powietrze i przenieśmy świat dronów FPV na nowy poziom.

Katalog
Pomoc i informacje prawne
© 2026 DIYFPV. Wszelkie prawa zastrzeżone.