Zdjęcie użytkownika

Dreamfpv

Ostatnio widziano: 10 lis, 07:54
Obserwujący
1
Obserwowani
2
Głosy za
0
Wpisy
6
Hi, I'm a 13 year old wanting to get into Fpv quads. I mainly look forward to flying freestyle and cinematic cruising. When I get my drone, I want to start a Youtube channel where I post footage of my flights. I'd enjoy flying with fellow drone enthusiasts!

Kanał aktywności

25 października 2026 02:56

Skomentowano post użytkownika
There was insane rain and thunder in upper Melbourne, near Sunbury, today and yesterday.

22 października 2026 05:16

Skomentowano post użytkownika
@TheoHerd30 For cinematic, I would still pick something like the Pavo or a 3-5" built for cinematic over the Avata 2, because it has lots propwash as BreezyAire said, so when you try to do something just a bit spontaneous, it struggles. The one thing that the Avata 2 excels at is battery life, getting over ~15mins per pack.
:)

22 października 2026 00:37

Skomentowano post użytkownika
Depends on how you want to fly, if you want to fly freestyle or anything remotely fast or aggressive, NO. If you want to fly slow, smooth cinematic and maybe slight long range, sure.
:)

18 października 2026 20:12

Skomentowano post użytkownika
I've heard that the WalleFPV Eagle 2 is good. It doesn't come prebuilt with 04 wide, but it comes with 04 pro or no vtx, so you can install it.
:)

13 października 2026 06:34

Skomentowano post użytkownika
If you want one that runs relatively smoothly on an Intel Integrated Graphics (like I do), go with Liftoff. If you have a better GPU, go for Uncrashed. You can customize all sorts of settings, such as drag, kv, stator size etc etc, and its graphics are better, and its maps are bigger (I think), and the racing is way better than in Liftoff.
Though, many people say that the physics in The Zone are some of the best, but it only has a few small maps.
Hope this helps!
:)

11 października 2026 19:50

Skomentowano post użytkownika
In addition to the Archetype frame, AetherFPV is releasing the Amity soon, a 3" squashed x frame. It is pretty heavy (75g) but it has 9-12mm motor mounting. It is a bit of an expensive frame, ($100) but another option is the Open frame from Opendrone. This frame is another 3", 55g, 9-12mm motor mounting, and it's open source, so you can cut it yourself (supposedly)
Hope this helps!
:)

9 października 2026 03:04

Opublikowano post

What happened to the part builder?

It's blocked, under maintenance.

:)

7 października 2026 21:17

Skomentowano post użytkownika
Update: 
I came back a few days later, and the problem was resolved, not sure how.
:)

7 października 2026 04:37

Skomentowano post użytkownika
I tried changing that, but the same thing happened
:)
Zdjęcie opublikowane przez użytkownika
Zdjęcie opublikowane przez użytkownika

6 października 2026 23:16

Opublikowano post

When I tried to build a light strip in the Drone Builder, I sized the front image properly (as seen below), but then when I went to the next step to draw the outline, it compressed the image (as seen below). I don't know why.

:)

Zdjęcie opublikowane przez użytkownika
Zdjęcie opublikowane przez użytkownika

5 października 2026 04:54

Skomentowano post użytkownika
If you want your footage to look faster, fly very close to the ground, and use an ND filter (not sure if you're using one in this video) to get that nice motion blur.
Also regarding motion blur, one common way of achieving good motion blur is the 180 degree shutter rule (Shutter speed is 2x your framerate eg. 60fps, 1/120s shutter speed)
:)

5 października 2026 04:49

Skomentowano post użytkownika
This is not really a flying thing, but if you want to make your footage better, you should stabilize the video in post-production.
I know that Gyroflow is very popular, and has a good track record.
Hope this helps!
:)

4 października 2026 08:40

Skomentowano post użytkownika
Hey, I'm near Melbourne too!
Love the dives!
:)

4 października 2026 08:39

Skomentowano post użytkownika
He's a really good first time pilot.
I hope that I will be as good as him! 
:)

1 października 2026 23:04

Skomentowano post użytkownika
Mowing lawns
Lemonade stand
Flipping things on secondhand marketplaces
Selling things you just have lying around
Hopefully this helps!

30 września 2026 22:04

Opublikowano post

Can a 3" 4s 04 Pro cinematic/light freestyle open prop drone fly LR over suburbs, 10km+ with a few upgrades (antennas etc)?

27 września 2026 23:02

Skomentowano post użytkownika
I'm waiting on a very similar part, the SpeedyBee F405 V2 AIO2! ⌚

25 września 2026 23:01

Skomentowano post użytkownika
The GEPRC SpeedX2 1505 4300Kv are almost twice the price, at least in my region.
Why do you recommend them over the RateFpv ones?

25 września 2026 00:13

Opublikowano post

What do you guys think of my build idea?

I'm new to the hobby, want to fly freestyle and cinematic.

AetherFpv Amity frame (3")

T-motor VELLOX v1507 4s (~4100kv)

Speedybee F405 V2 40A AIO

DJI 04 Pro air unit

M10Q GPS module (for speed readings on my OSD, RTH and telemetry)

Gemfan 3106

Happymodel EP1 2.4GHz

4s batteries

Vifly Finder mini buzzer module

maybe add some LEDs in the future

24 września 2026 07:48

Skomentowano build użytkownika : Archetype
I love this drone's design, and Nick's content!

Wzbijmy się razem w powietrze i przenieśmy świat dronów FPV na nowy poziom.

Katalog
Pomoc i informacje prawne
© 2026 DIYFPV. Wszelkie prawa zastrzeżone.