Ideas for Customizing a TX16S Transmitter?
hey
ideas for customising a tx16s?
👍 1
89 t.
Side grips, kick stand, metal buttons, switch covers, LED’s, there’s a lot of cool stuff for them. My favorite is making my own paint design and carefully painting it. Of course if your sure your gonna keep that remote forever. Bunches of ways to be unique.
Odpowiedz
89 t.
@TeleportFpv What paint do you use and how did you paint it?
👍 1
Odpowiedz
T
89 t.
Autor
yeah, but could u suggest a cool color combo or somthing? the best i could think of is like the normal black case with the gold or red buttons and leds
Odpowiedz
89 t.
A good quality spray paint any colors you want. But you’ll have to be comfortable with taking the remote apart and putting it back together afterwards. Wipe everything off that you plan to paint with isopropyl alcohol and a clean cloth. Use masking tape to cover anything you don’t want painted. And the inside of the shells ect. Use light coats till the color is solid in a well ventilated area. Let it dry for a day. Carefully put it back together. Helps to take pictures as you disassemble it so you know where everything goes. There’s probably videos on it on YouTube to help.
Odpowiedz
89 t.
This is my boxer. Coming up with your own idea is what makes it unique. Have fun make it your own.
🔥 1
👍 1
Odpowiedz
T
89 t.
Autor
@TeleportFpv kayy, thnx man
🫡 1
Odpowiedz
89 t.
@TeleportFpv That looks really nice, how does the texture feel? I recently painted my T-lite, three coats of spray paint and a clear coat but some paint has already starting to chip
Odpowiedz
89 t.
@Lagkapt I got the clear case and essentially painted my idea in reverse. It’ll never wear that way. However once I was totally done with paint and removed all the tape I set it in the oven with the door cracked at 120 degrees F for about an hour to dry the paint 100% so it wouldn’t be sticky when I put the electronics back in.
Another trick you can do if you wanna paint on the outside is similar but the top coat need to be super matte
Which is a very high grade model top coat made by gundam factory. 20.00 a can and it’s very small. Then same steps just bake at 100 degrees for an hour. And be careful not to touch it as the finish will bake to a smooth crystal like flat matte and shows any and all prints/ or imperfections. I hope that’s helps man!
👍 1
Odpowiedz
88 t.
Thanks, for the clear case, did you spray paint the inside?
Odpowiedz
88 t.
I got the MAX, full size and I highly recommend the AG01 gimbals. They are unmatched. You can put them in other radios like the boxer, et. al.. RadioMaster is the best imo. Good luck Buddy!👍
👍 1
Odpowiedz
A
Dodaj komentarz