MootPoint000

Laatst gezien: 28 aug, 09:37

Volgers

Volgend

Upvotes

Berichten

New to FPV. SW developer by trade. Tinkerer by desire.

Activiteitenfeed

26 augustus 2026 om 16:10

Heeft gereageerd op het bericht van

MootPoint000

Yep, was focusing on 15’ or so. Will take some pictures to post here. I may need to try a deeper setting to see if your point on false focus is the case. These were not hard crashes, IMO. Leafy branches and grass.

25 augustus 2026 om 23:01

Heeft een bericht geplaatst

I have 2 Mobula8 HDZero models that have lost lenses. I bought a couple of the Runcam HD0 nano replacement lenses, but the focal length is WAY off. I turn maybe one or two threads of the lens to get some focus which is not near enough to really hold this lens on the camera. Any ideas?

4 augustus 2026 om 15:08

Heeft een bericht geplaatst

Looking to add a gimbal into the mix. I am using HDZero v2 goggles and looking at options. Anyone have experience with ATOMRC, Motionsic BAG, or Caddx GM3 - or other suggestions? Use is for a drone following racing/hunting dogs. Not looking for fancy; just to get the job done of keeping an eye on the dogs in the field from above.

7 maart 2026 om 20:04

Heeft gereageerd op het bericht van

MootPoint000

Was getting ready to start and made the choice to go with the Halo ESC & FC. I know I am at the edge with this, and as a first build, I decided to keep it safer with the higher amp stack. So, will build a Tiny Trainer with the AIO later this summer (NA).

7 maart 2026 om 17:11

Heeft gereageerd op het bericht van

MootPoint000

Hearing the Gamma may not be up to the task. May need a re-think. Or just go for it.

7 maart 2026 om 14:23

Heeft een bericht geplaatst

Finally have all the parts for my very first build. An all HDZero build. Finding motors was a real pain. I looked for

CNHL SpeedyPizza AxisFlying Diavola 2207 1960Kv Brushless Motor

BrotherHobby VS 2207 Motor (CW) - 1720KV

and settled on RCInpower GTS V3 2105 Plus 2950KV M5-Mount Motor since it was in stock. Being Teal/Pink will be flashy with the pink frame.

I am going to try 2 different propellers. 4” or 4.5”? The prop and the motor combo will be interesting to test. I am by no means an expert, so I may not notice or may be totally overwhelmed.

Parts

Frame: Aether FPV Archetype

Motors: RCInpower GTS V3 2105 Plus 2950KV M5-Mount Motor

Propellers: Gemfan Wimdancer 4023-3 / Gemfan Hurricane 4525-3

Flight Controller: HDZero Gamma 45A AIO

VTX: HDZero Freestyle V2

Camera: HDZero RunCam Micro V3

Antenna: TrueRC Core 5.8 RHCP

26 januari 2026 om 15:31

Heeft gereageerd op het bericht van

MootPoint000

Very nice! I am going for the pink but that mint is fresh! Still deciding on motors and I think an M5 shaft like you have is the way to go.

25 januari 2026 om 22:21

Heeft gereageerd op het bericht van

MootPoint000

Yes, the Aether FPV Archetype. I need to look at the mounts again, thanks. Saw a build with the Chief 2005 Luminier which are 12x12. Trying to keep to 4s.

25 januari 2026 om 21:16

Heeft een bericht geplaatst

Bought an Archetype frame and will suffer the shipping to US for such a great looking frame. Plan to go all HDZero, with the Gamma AIO, and Freestyle V2 VTX. Looking at the Deepspace Pulsar 2207 2150kv to get 4s-6s. Thoughts on motors? Would really like to stay in 2207. Plan freestyle, but I am not advanced by any means.