Help! Video Issues with Caddx Ant on 6S Quad

hello everyone I have a question. so I built a 6s quad and had gotten a bad camera that didnt work so I had tooken the caddx and camera from my 3s quad because it can run 6s and it worked fine until I got a new camera and put the caddx ant in my darwin fov babyape v3 pro and the video was all squigly and black and wight and I thought a antenna might have popped of but it didnt i tried a new antenna and vtx both did not fix it. Anyone might know whats wrong?

thebeastgreat4

32sem.

Auteur

ok well i plugged it back into the 6s quad and it worked fine I am realy lost rn.

Répondre

flyy.like.a.bird

32sem.

Check and make sure the wire connections are all clean and not shorting out anywhere. Make sure your vtx is getting proper power from the fc. Also check and make sure that there is no solder shorting out anyting. If all your wire connections are clean and put where they are supposed to go, i wouldn't know anymore than this. Does the drone function properly except for the vtx?

Répondre

thebeastgreat4

32sem.

Auteur

yes the drone works perfectly other than this the video has seemed to clear up a little and get color but it is still very strange and not clear even for analog and even at max power the vtx seems to get short range wich it hasnt always had long range but it is very short now its a 1.2 watt vtx.and all the connections seem to be good

Répondre

Laisser un commentaire