Benutzer-Titelbild
Benutzerbild

koral

Zuletzt gesehen: 22. Nov., 08:32
Follower
1
Folge ich
4
Positive Bewertungen
0
Beiträge
7
FPV pilot and custom drone builder focused on high-performance DIY engineering, ranging from ultralight micro builds, long-range to tactical rigs. Member of Kuźnia Wektorów (Vectors Forge), a collective of passionate constructors and pilots dedicated to designing, building, and pushing custom FPV hardware to its limits.

Aktivitätsfeed

12. November 2026 um 18:56

Hat einen Beitrag erstellt

Builders of the world! 🤗 Can I solder GND and 5V pads of two different elements to one GND and 5V pad on the FC? 😶


I am buidling a cinewhoop with the JHEMCU GHF405AIO-HD 40A AIO, and there is less GND and 5V pads than UARTs/utility slots. I was thinking of connecting the FPV camera with Runcam to the camera pads (UART3), and buzzer with GPS on the GPS pads (UART4). The idea is to connect both element's GND and 5V wires then solder them to the pad.

Vom Benutzer gepostetes Bild
Vom Benutzer gepostetes Bild

8. November 2026 um 21:35

Hat einen Beitrag erstellt

a day very off | ʇʇo dronzing

blessing days when you can just do what you want

🐝 https://www.youtube.com/watch?v=9QszNoAtCuk

27. Oktober 2026 um 20:00

Hat einen Beitrag erstellt

23. Oktober 2026 um 15:51

Hat den Beitrag von kommentiert
I run Velocidrone on a old laptop with Intel i5 258mb VRAM chip and 8 gigs RAM - only selected maps with less objects or indoor ones go pretty smooth on minimum graphic settings, and high physics CPU usage.

23. Oktober 2026 um 12:12

Hat den Beitrag von kommentiert
I would focus on the highschool as the main mission - it will soon be over. Carry the whoop or toothpick everywhere :) hahaha and if you cant catch a window to fly in the 15 minute break in the library lobby, try to catch even 15 minutes at the end of the day on a sim. An evening regular ritual, you will not rust (just adjust the sim to your real drone). I have not been flying for long, but from what I can see, most people I know fly only during weekends, for an hour or so. I fly almost everyday after 9pm, when all stuff is complete. This usually means flying in the dark - I just adjusted the gear (analog & blacklight).

22. Oktober 2026 um 21:41

Hat den Beitrag von kommentiert
If you want to make a toothpick on a carbon, then you can grab a Flywoo Firefly 18 baseplate or some other light carbon plate (I found that in my local shop in Poland), combine it with Air75 II canopy (or any canopy from the BetaFPV series) and Flywoo Prop-Guards (1.8-2 inch) and there you go: https://www.youtube.com/watch?v=y49_9ZEGZ4o <- without the prop-guards or LED/Buzzer it may have the edge over Meteors.
Vom Benutzer gepostetes Bild

22. Oktober 2026 um 21:36

Hat den Beitrag von kommentiert
It just started raining where I live too... I guess its time for guerilla whooping shopping galleries and parking floors or just getting better in the sim 🐝

22. Oktober 2026 um 21:02

Hat den Beitrag von kommentiert
Solder the pads (left is TX800, right is FC):
· VIDEO to VTX 
· 5V to 5V
· GND to GND
· IRC to TX (UART 1 is supposedly the default)

The UART should be set to IRCTramp.

The rest can be connected probably with JST pins. Thats a great stack.


Vom Benutzer gepostetes Bild

22. Oktober 2026 um 20:51

Hat den Beitrag von kommentiert
Super, in the 120m limit - even better.

22. Oktober 2026 um 20:40

Hat einen Beitrag erstellt

Do you fly after sunset?

 

Autumn is definitely here 🍂 and the sun goes down way too quickly 🌇.

I built a toothpick drone (specs below) specifically for night flights around light sources. Since that usually means flying closer to people, keeping it lightweight and quiet was key.

 

So far, I’ve tested three cameras for low-light performance (jump to the middle of the film to see the comparisons):

· BetaFPV C03

· Caddx Ant

· Caddx Baby Ratel 2

 

Hands down, the Caddx Baby Ratel 2 is the clear winner here! 🥇🏆👏 https://youtu.be/vSrN_A83csQ?si=8r-59fR1qkDrxMV_&t=171

 

Drone specifications:

· Frame: Bottom plate Yuenhoang 2 inch + Flywoo prop-guards

· Canopy Air75 II

· AIO BetaFPV Matrix 1S (5IN1) v2

· Camera Caddx Baby Ratel 2 1200TVL

· Motors RCINPOWER GTS V3 1002 19000KV x 4

· Props Gemfan 45mm-2

· Buzzer/LED HGLRC WS2812 (1.36g)

28. September 2026 um 08:41

Hat den Beitrag von kommentiert
Maybe its stuck at customs.

26. September 2026 um 21:17

Hat den Beitrag von kommentiert
If you are sure you want to fly but not sure for how long, and on a budget, then Bartek is right, but if you plan to stay in that hobby for longer, then invest, so you will only pay once ;)

24. September 2026 um 13:45

Hat den Beitrag von kommentiert
a flying bike

24. September 2026 um 12:32

Hat einen Beitrag erstellt

𝖠 𝖦𝖱𝖤𝖤𝖭 𝖥𝖫𝖠𝖲𝖧𝖨𝖭𝖦 𝖫𝖤𝖣?!​

(a post on EU/EASA rules)


One of our local pilots, who was flying after sunset, was admonished by police during the control for not having navigational lights 😵 and warned that this may be a subject to a serious consequences next time, as this can be treated as causing threat to air traffic safety 🙃 I forgot to mention that he was flying a microdrone (1.8'').


I checked it, and apparently in EU there is an active rule 2019/94 UAS.OPEN.060 / point 2G: the operator ensures that, during night operations, a flashing green light is activated on the unmanned aircraft.


The law does not state any technical details; the light must be green and flashing. So the next thing I did is build a lightest led light 😎🐝 I bought a 3mm led light with an inbuilt flashing chip and the 150R 0,6W resistor. Both super tiny. Together with the AWG30 cables and thermal coating it is 0.38 g. Works, drains 20mA, so it has not much impact at all on the current, and I succesfully added it to my 1.8 and 2 inch drones.

Image posted by user

Image posted by user

Vom Benutzer gepostetes Bild
Vom Benutzer gepostetes Bild

28. Juli 2026 um 07:49

Hat einen Beitrag erstellt

Testing Caddx Ratel Pro at night in minimum light conditions:

https://www.youtube.com/watch?v=ZX5tXfH4Mj0

(descriptions are made in Polish only, soz for the inconvenience😉)


ℌ𝔞𝔰𝔰𝔢𝔩𝔥𝔬𝔣𝔣 4'' Long Range Drone 🐝 𝘋𝘐𝘠 𝘱𝘳𝘰𝘫𝘦𝘤𝘵 :

Frame Flywoo Explorer LR O3

Stack FLYWOO GOKU F722 Pro Mini V2 45A 32Bit 128K AM32

Motors iFlight XING2 1404 3000KV ELRS Radiomaster RP3 V2

ExpressLRS 2.4ghz Nano Receiver GPS GOKU GM10 Mini V3 GPS

VTX Speedybee TX800

Antena iFlight 5.8GHz Albatross V2 Antenna

Camera CADDX Ratel Pro 1500TVL FOVD NTSC/PAL

Buzzer 100dB VIFLY Finder Mini

Propellers Gemfan LR 4024-2

Strobe VIFLY Strobe Platinum

Batteries Tattu HV 4S 15.2V 850 & 750mAh 95C XT30

27. Juli 2026 um 08:45

Hat einen Beitrag erstellt

Thermovision cameras: I have been thinking on buildling a drone for night flying with switchable cameras - one with Ratel Pro (as it is excellent for this purpose) and second - the 256x192 4MM CVBS for environment without much light. Anyone tried this model? 🫠


I wonder how usable it is eg. to land in total darkness in zero-light enviornment. I was flying yesterday after 11pm with Ratel Pro only, in the woods, the background was hardly visible without additional light 😑 it was very hard to find the landing place at aim for it.


PS: I got inspired with Hoarder Sam's video 😎

Lass uns gemeinsam abheben und die Welt der FPV-Drohnen auf ein neues Niveau bringen.

© 2026 DIYFPV. Alle Rechte vorbehalten.