jsheeley1129

They're direct soldered, no screws touch any windings as well. I have clean solder joints too. I've tried to trouble shoot all possibilities using the net and everything is pointing toward the wires being mixed up and I can't use motor wizard in beta because this little dude is on an older version of betaflight. Thank you for replying my friend I appreciate your help. 👍

I've tried playing with the dshot numbers and it gets the same result. All of my motor poles are perfect also. I used the stock nanohawk cli dump and the emax motors that go with the nano as well. So it's all on stock tune. I should have mentioned this all started after I installed an elrs receiver in it and the 1 wire on motor 2 came off, re-soldered that, and 2 wires on motor 4 which were reattached as well. I swapped everything onto a toothpick frame, so everything with the quad was fine before that. It flew perfectly normal. Ive tried trouble shooting all possible avenues. That's why I asked if it was possible I crossed the 2 wires on motor 4? I'm unable to use the motor wizard in beta because as you probably know this little guy is on an older version of betaflight. I appreciate you replying and helping me out. I've only been into fpv for a little over a year and just started taking it up a notch and trying to build my own stuff. Thank you my friend I really appreciate your time.

Sweet brother!